Light Monkey Non Balanced P-Valve

£49.20

Ref: DEE001-35.100.000

Description

Light Monkey Non-Balanced P-Valve is a very simple design, making it very reliable, easy to clean. It very compact and low profile.We supply a custom made rubber gasket that can be glued to the suit enabling the valve to be removed for cleaning and refitted. This much reduces the risk of it leaking in water as a good seal can be achieved.

This item is for DIY fitting. NOT as an option on a new Seaskin drysuit order.

More info

Can be fitted in the two ways.

  • Choose valve position and mark suit.
  • Cut correct size hole in drysuit 16mm for membrane suits, 13mm for neoprene suits.
  • Roughen up the top of the main body with glass paper.
  • Coat main body top with Stormsure (Ref: STO002-S15) or Aquasure.
  • Insert thread through hole in suit.
  • Orientate tubing to the desired direction (normally straight up)
  • Tighten down locking nut with 1 inch spanner (American!) or good adjustable holding the tube on the inside of the suit. Retighten a few days later if fitted to neoprene..
  • Leave to dry for at least 12 hours
  • This method allows the pee valve to be removed by peeling away from the Aquaseal.

Or:

  • Choose valve position and mark suit.
  • Draw around the valve patch on the INSIDE of the suit to give you a guide for gluing
  • Roughen the rubber valve patch supplied with glass paper
  • Use Neoprene Queen 30g (Ref: STO002-NQ) to glue patch to the inside of the suit. Use three coats and let dry between coats)
  • Leave to dry for at least 12 hours. Cut through the suit using the valve patch as your guide.
  • Insert thread through hole in suit.Orientate tubing to the desired direction (normally straight up)
  • Lubricate valve patch with some silicon grease or a bit of saliva will do
  • Tighten down locking nut with 1 inch spanner (American!) or good adjustable holding the tube on the inside of the suit. Retighten a few days later if fitted to neoprene.

£49.20

£41 (Non UK orders ex.VAT)