SITech Inflation valve (push) INT’L


Ref: ALP001-25210


Inflation valve that rotates a full 360 degrees, and so requires a special tool set to fully tighten. These are best fitted to the drysuit using a SiTech Internal Valve port NGR shown below glued in place internally.

The hole in the suit is smaller than those required for the Apeks valves (32mm) and so the Internal Valve port shown below to maintain a water tight seal. These have the International type nipple.

The valve is operated by pushing the recessed central button.


£42.96 (Non UK orders ex.VAT)